143 products. Compare equipment and media for industrial water treatment, then confirm the model against your water-system duty.

Flow Meter
VPEMF Series Electromagnetic Flow Meter is an electromagnetic flow measurement instrument for suitable conductive-liquid applications in water treatment and industrial process systems. Selection depends on pipe size, expected flow range, fluid characteristics, operating pressure and temperature, installation arrangement and required output or communication.

Liquid Analyzer
CODG-3000 Online COD Analyzer is an instrument for measuring or monitoring COD in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Advanced PHM-200 Online pH / ORP Meter is an instrument for measuring or monitoring pH in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Flow Meter
VPULF Series Ultrasonic Clamp On Flow Meter is an ultrasonic flow meter intended for non-invasive flow measurement where the selected configuration is suitable for the pipe, liquid and operating conditions. Selection should consider pipe material and size, fluid, flow range and installation conditions.

Filtration Multimedia
Mining Silica Sand is a filtration media product used in suitable water-treatment filtration beds. Media selection depends on the target contaminant, media grade/particle size, filter vessel design, bed configuration, service flow and backwash conditions.

Filtration Multimedia
Food Grade Anthracite cw Halal, NSF, Kosher is a filtration media product used in suitable water-treatment filtration beds. Media selection depends on the target contaminant, media grade/particle size, filter vessel design, bed configuration, service flow and backwash conditions.

Filtration Multimedia
River Graded Sand & Gravel is filter-grade silica sand/gravel supplied in multiple gradings for suspended-solids removal and filtration media applications.

Ion Exchange Resin
Industry Grade Strong Base Anion Exchange Resin (Ionlite 658F) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Chemical
VEPURE RO590 is a reverse osmosis antiscalant for scale-control applications in suitable RO systems. Dose selection depends on feed-water chemistry, membrane type, recovery, temperature and the manufacturer's dosing guidance.

Piping / Fabrication
Manual Frontal Piping Fabrication is a fabricated piping solution for suitable water-treatment or industrial system requirements. Selection depends on pipe material, size, routing, pressure, connection details, supports and fabrication requirements.

Valves
Stainless Steel Multipod Valve is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Flow Meter
VPOC-200 Compact Open Channel Flow Meter is an open-channel flow measurement instrument for suitable channels, flumes or weirs where the selected configuration can measure liquid level and derive flow according to the manufacturer's method.

Flow Meter
VPOC-100 Remote Open Channel Flow Meter is an open-channel flow measurement instrument for suitable channels, flumes or weirs where the selected configuration can measure liquid level and derive flow according to the manufacturer's method.

Flow Meter
TBFM Series Turbine Flow Meter is a flow measurement product for suitable water or industrial process applications. Selection should match the liquid, pipe or measurement configuration, expected flow range and operating conditions.

Liquid Analyzer
LSGG-5090Pro Online Phosphate Analyzer is an instrument for measuring or monitoring pH in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Flow Meter
VPEMF Series Insertion Electromagnetic Flow Meter is an electromagnetic flow measurement instrument for suitable conductive-liquid applications in water treatment and industrial process systems. Selection depends on pipe size, expected flow range, fluid characteristics, operating pressure and temperature, installation arrangement and required output or communication.

Liquid Analyzer
Portable MLSS-1708 Total Suspended Solid Meter is an instrument for measuring or monitoring MLSS in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
NTU-100 Online Turbidity Meter (Low Range) is an instrument for measuring or monitoring Turbidity in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Basic TC-2200 Online Residual Chlorine Meter is an instrument for measuring or monitoring Residual Chlorine in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Smart CLM-300 Online Residual Chlorine Meter is an instrument for measuring or monitoring Residual Chlorine in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
GSGG-5089Pro Online Silicate Analyzer is an instrument for measuring or monitoring Silicate in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
DWG-5088Pro Online Sodium Meter is an instrument for measuring or monitoring Sodium in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Benchtop DOB-100 Dissolved Oxygen Meter is an instrument for measuring or monitoring Dissolved Oxygen in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Portable DOP-100 Dissolved Oxygen Meter is an instrument for measuring or monitoring Dissolved Oxygen in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Basic DOM-100 Online Dissolved Oxygen Meter is an instrument for measuring or monitoring Dissolved Oxygen in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Advanced DOM-200 Online Dissolved Oxygen Meter is an instrument for measuring or monitoring Dissolved Oxygen in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Benchtop ECB-100 Conductivity / Resistivity / TDS Meter is an instrument for measuring or monitoring Conductivity in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Ion Exchange Resin
Strong-acid cation resin for the treatment duty documented for this grade. Verify feed-water chemistry, target ions and regeneration requirements.

Liquid Analyzer
Portable ECP-100 Conductivity / Resistivity / TDS Meter is an instrument for measuring or monitoring Conductivity in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Ion Exchange Resin
Inert Resin (IONLITE IR-6) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Ion Exchange Resin
Boron Removal Resin (IONLITE BR100) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Ion Exchange Resin
Macroporous Weak Base Anion Exchange Resin (IONLITE A451FC) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Ion Exchange Resin
Heavy Metal Removal Chelating Resin (Ionlite MR100) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Ion Exchange Resin
Ready To Use Semiconductor Grade Ultra Pure Mixed Bed Resin (Ionlite 800MB) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Ion Exchange Resin
Premium Grade Strong Base Anion Exchange Resin (Ionlite A700M) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Ion Exchange Resin
Premium Grade Strong Acid Cation Exchange Resin (Ionlite C250M) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Ion Exchange Resin
Industry Grade Softener Resin (Ionlite C259IG) is an ion exchange resin intended for the water-treatment or process application stated by its grade. Resin selection should be based on the target ions or contaminants, feed-water chemistry, required treated-water quality, operating conditions and regeneration or service method.

Liquid Analyzer
Basic ECM-100 Online Conductivity / Resistivity Meter is an instrument for measuring or monitoring Conductivity in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Advanced ECM-200 Online Conductivity / Resistivity Meter is an instrument for measuring or monitoring Conductivity in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Benchtop PHB-100 pH / ORP Meter is an instrument for measuring or monitoring pH in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Portable PHP-100 pH / ORP Meter is an instrument for measuring or monitoring pH in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Liquid Analyzer
Basic PHM-100 Online pH / ORP Meter is an instrument for measuring or monitoring pH in suitable water-treatment, process or wastewater applications. The measurement configuration, range and sample conditions must match the application and manufacturer specification.

Filtration Multimedia
China Industrial Grade Anthracite is a filtration media product used in suitable water-treatment filtration beds. Media selection depends on the target contaminant, media grade/particle size, filter vessel design, bed configuration, service flow and backwash conditions.

Aquamatic Products
AquaMatic Stager Control 962 is an Aquamatic water-treatment component used in suitable automatic valve, filtration or water-treatment system configurations. Selection depends on the exact model, valve arrangement, connection and system duty.

Aquamatic Products
AquaMatic Stagers is an Aquamatic water-treatment component used in suitable automatic valve, filtration or water-treatment system configurations. Selection depends on the exact model, valve arrangement, connection and system duty.

Valves
Stainless Steel Diaphragm Valve V46 Series is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Aquamatic Products
AquaMatic PVC Ejector is an Aquamatic water-treatment component used in suitable automatic valve, filtration or water-treatment system configurations. Selection depends on the exact model, valve arrangement, connection and system duty.

Valves
Plastic Diaphragm Valve K53 Series is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Valves
Plastic Diaphragm Valve K52 Series is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Valves
Metal Diaphragm Valve VAV Series is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Valves
Metal Diaphragm Valve V42 Series is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Valves
Float Operated Brine Valve (Pilot Valve) is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Wastewater Treatment Equipment
Wastewater Evaporator is wastewater-treatment equipment for the application indicated by its product type. Selection depends on wastewater flow, contaminant load, treatment objective, process configuration and operating conditions.

Valves
Multiport Softener Valve - India Origin is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Valves
Multiport Softener Valve is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Valves
Multiport Filter Valve is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Valves
Erie Softener Valve is a valve for controlling, isolating or directing flow in suitable water-treatment and industrial piping systems. Selection depends on valve function, size, pressure rating, connection, material, fluid compatibility and operating temperature.

Ultraviolet Sterilizer
Aqualight Ultraviolet Disinfection System is an ultraviolet disinfection system for suitable water applications where UV treatment is appropriate. Selection depends on flow, water quality, UV dose requirements, UV transmittance and the manufacturer's validated operating conditions.

Ultraviolet Sterilizer
Atlantic Ultraviolet, USA is an ultraviolet disinfection system for suitable water applications where UV treatment is appropriate. Selection depends on flow, water quality, UV dose requirements, UV transmittance and the manufacturer's validated operating conditions.

RO Membrane
Lewabrane RO Membrane is a reverse osmosis membrane product used for reducing dissolved constituents in suitable water-treatment systems. Selection depends on feed-water quality, membrane element configuration, design flow, pressure, temperature, recovery and system pretreatment.

RO Membrane
VEPURE RO Membrane is a reverse osmosis membrane product used for reducing dissolved constituents in suitable water-treatment systems. Selection depends on feed-water quality, membrane element configuration, design flow, pressure, temperature, recovery and system pretreatment.

Pressure Regulators / Relief Valve
RV Series Pressure Relief Valves is a pressure protection or relief component for suitable water-treatment and industrial systems. Selection depends on set pressure, operating pressure, flow, fluid, connection and discharge arrangement.

Reverse Osmosis Skid
Reverse Osmosis Skid is a packaged reverse osmosis system for suitable water-purification applications. Selection and sizing depend on feed-water analysis, required permeate flow and quality, recovery, pressure, pretreatment and operating conditions.

Magnum Valve
Magnum Valve is a control valve used in suitable water-treatment system configurations. Selection depends on the exact model, vessel size, flow demand, connection and control arrangement.

Myron L
Myron L Ultrameter II is a Myron L water-quality measurement instrument for the parameters covered by the specific model. Selection depends on the parameter, range, sample/application and whether portable or bench/field measurement is required.

Myron L
Myron L Resistivity Meter 750 II is a Myron L water-quality measurement instrument for the parameters covered by the specific model. Selection depends on the parameter, range, sample/application and whether portable or bench/field measurement is required.

Myron L
Myron L Conductivity Meter 750 II is a Myron L water-quality measurement instrument for the parameters covered by the specific model. Selection depends on the parameter, range, sample/application and whether portable or bench/field measurement is required.

Myron L
Myron L DS Meters is a Myron L water-quality measurement instrument for the parameters covered by the specific model. Selection depends on the parameter, range, sample/application and whether portable or bench/field measurement is required.

FRP Tank
FRP vessels for suitable filtration or softening media. Confirm dimensions, media volume, pressure, connections and system configuration.

FRP Tank
Portable DI Column is a fibre-reinforced plastic tank or column used as a vessel for suitable water-treatment media or treatment components. Selection depends on vessel size, media volume, operating pressure, connection configuration and system duty.

FRP Tank
Pentair FRP Column is a fibre-reinforced plastic tank or column used as a vessel for suitable water-treatment media or treatment components. Selection depends on vessel size, media volume, operating pressure, connection configuration and system duty.

BI-CHEM (Bacteria)
CHM-BEC-PUPL and Paper is a biological treatment product used for the wastewater-treatment application indicated by its product designation. Selection should be based on the wastewater characteristics, treatment objective, process configuration and operating conditions.

BI-CHEM (Bacteria)
CHM-BEC-FAC (Anaerobic) is a biological treatment product used for the wastewater-treatment application indicated by its product designation. Selection should be based on the wastewater characteristics, treatment objective, process configuration and operating conditions.

BI-CHEM (Bacteria)
CHM-BEC-207 (Grease Digester) is a biological treatment product used for the wastewater-treatment application indicated by its product designation. Selection should be based on the wastewater characteristics, treatment objective, process configuration and operating conditions.

BI-CHEM (Bacteria)
CHM-BEC-205 is a biological treatment product used for the wastewater-treatment application indicated by its product designation. Selection should be based on the wastewater characteristics, treatment objective, process configuration and operating conditions.

BI-CHEM (Bacteria)
CHM-BEC-203 is a biological treatment product used for the wastewater-treatment application indicated by its product designation. Selection should be based on the wastewater characteristics, treatment objective, process configuration and operating conditions.

BI-CHEM (Bacteria)
CHM-BEC-200 is a biological treatment product used for the wastewater-treatment application indicated by its product designation. Selection should be based on the wastewater characteristics, treatment objective, process configuration and operating conditions.

BI-CHEM (Bacteria)
CHM-ARMB-5B (Ammonia Reduction) is a biological treatment product used for the wastewater-treatment application indicated by its product designation. Selection should be based on the wastewater characteristics, treatment objective, process configuration and operating conditions.

Autotrol Valve
Autotrol 273/278 Control Valve is an Autotrol control valve used in suitable water softener or filtration system configurations. Selection depends on valve model, vessel size, flow demand, connection and control configuration.

Autotrol Valve
Autotrol 263/268 Control Valve is an Autotrol control valve used in suitable water softener or filtration system configurations. Selection depends on valve model, vessel size, flow demand, connection and control configuration.

Chemical Pump
Chemical Pump S & N is a chemical dosing pump for metering treatment chemicals into suitable water or process systems. Selection depends on dosing flow, discharge pressure, chemical compatibility, duty cycle and control method.

Filter Nozzle & Distribution System
Stainless Steel Slotted Pipe/Lateral Pipe is a filter underdrain, nozzle, lateral or distribution component used to distribute flow and retain treatment media in suitable filtration or ion-exchange vessels. Selection depends on vessel geometry, slot/opening characteristics, flow distribution and media size.

Filter Nozzle & Distribution System
Stainless Steel Filter Nozzle is a filter underdrain, nozzle, lateral or distribution component used to distribute flow and retain treatment media in suitable filtration or ion-exchange vessels. Selection depends on vessel geometry, slot/opening characteristics, flow distribution and media size.

Filter Nozzle & Distribution System
Stainless Steel Distribution System is a filter underdrain, nozzle, lateral or distribution component used to distribute flow and retain treatment media in suitable filtration or ion-exchange vessels. Selection depends on vessel geometry, slot/opening characteristics, flow distribution and media size.

Filter Nozzle & Distribution System
PVC Slotted Pipe/Lateral Pipes is a filter underdrain, nozzle, lateral or distribution component used to distribute flow and retain treatment media in suitable filtration or ion-exchange vessels. Selection depends on vessel geometry, slot/opening characteristics, flow distribution and media size.

Filter Nozzle & Distribution System
PP Filter Nozzles is a filter underdrain, nozzle, lateral or distribution component used to distribute flow and retain treatment media in suitable filtration or ion-exchange vessels. Selection depends on vessel geometry, slot/opening characteristics, flow distribution and media size.

Activated Carbon
Granular adsorption media for selected chlorine and organic-compound reduction, subject to carbon grade, target water quality and contact time.

Filtration Multimedia
Anthracite (Halal Certified) is a filtration media product used in suitable water-treatment filtration beds. Media selection depends on the target contaminant, media grade/particle size, filter vessel design, bed configuration, service flow and backwash conditions.

Filtration Multimedia
Manganese Green Sand is manufactured from glauconite green sand and is documented for iron and manganese removal in gravity or pressure filtration systems.

Iron Removal Media
Iron Treat is manganese dioxide granules documented for removal of iron, hydrogen sulphide and manganese from water through an oxidation-reduction and filtration process.

Iron Removal Media
DMI-65 is a catalytic water-filtration media documented for removing iron, manganese and arsenic from water through catalytic oxidation and retention of precipitated contaminants. The supplied datasheet states NSF/ANSI 61 certification for drinking-water applications.

Iron Removal Media
BIRM is a filtration media documented for reduction of dissolved iron and/or manganese in water supplies by enhancing oxidation reactions with dissolved oxygen. The supplied datasheet states that regeneration is not required, while backwashing is required.

Ion Exchange Resin
Lewatit Germany is a range of ion-exchange resins for water demineralization, polishing, selective ion removal and other process applications. The supplied product files document several Lewatit grades with different resin chemistries and intended uses.

Activated Carbon
Powder Activated Carbon is a finely divided adsorbent used for liquid-phase purification where powdered carbon dosing is appropriate. The supplied files document coconut-shell VS 55 and wood-based R4W10 grades with different properties.

Activated Carbon
Granular Activated Carbon is an adsorption media used for water purification and industrial wastewater treatment. The supplied datasheets document coal-base and palm-shell activated-carbon grades with different adsorption and physical properties.

Filtration Multimedia
Indian Garnet Sand is an alluvial Almandine-family garnet filtration media supplied in the documented #20/40 grade for suitable water-filtration applications.

Filtration Multimedia
Australia Industrial Grade Anthracite is filter coal used as a filtration media in suitable water-treatment filter beds. The supplied datasheet identifies C&S Filter Coal properties and backwash guidance.

Filtration Multimedia
Australia Zeolite is filter-grade natural Australian zeolite, identified in the supplied catalogue as clinoptilolite, for use as a filter medium in multimedia water-filtration units.

Bag Filter Housing
Replaceable-bag housings for suspended-solids pretreatment in suitable water and compatible liquids. Confirm bag rating, flow, pressure and material.

Automatic Disc Filter
Grooved-disc filtration with configured automatic backwash for suitable industrial pretreatment and irrigation. Match disc grade, flow, pressure and drain needs.

Automatic Disc Filter
F63TDZ: 2 inch self-cleaning disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Disc Filter
F75TD: 2.5 inch t-type disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Disc Filter
F63TD: 2 inch t-type disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Butterfly Valve
AS90BV: 3 inch butterfly valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Butterfly Valve
AS110BV: 4 inch butterfly valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Backwash Control Valve
F110FMS: 4 inch single-chamber three-way backwash valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Disc Filter
F90TD: 3 inch t-type disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Hydrocyclone Filter
F110LX: 4 inch hydrocyclone sand separator for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter
F110HDZ: 4 inch automatic h-type disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Hydrocyclone Filter
F63LX: 2 inch hydrocyclone sand separator for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Check Valve
AS160NRV: 6 inch flanged check valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Check Valve
AS110NRV: 4 inch flanged check valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Check Valve
AS90NRV: 3 inch flanged check valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Foot Valve
F90FV: 3 inch foot valve — web reference for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Foot Valve
AS90FV: 3 inch flanged foot valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Foot Valve
AS110FV: 4 inch flanged foot valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Foot Valve
AS160FV: 6 inch flanged foot valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Backwash Control Valve
F110FM: 4 inch double-chamber three-way backwash valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Backwash Control Valve
F90FM: 3 inch three-way backwash valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Backwash Control Valve
F63FM: 2 inch hydraulic backwash valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter
F90HDZ: 3 inch automatic h-type disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter
F90HDZ-L: 3 inch extended automatic h-type disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Air Valve
C20: 2 inch combined air valve for suitable water-pipeline air/vacuum management duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Air Valve
A20: 2 inch kinetic air / vacuum valve for suitable water-pipeline air/vacuum management duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Air Valve
C10: 1 inch combined air valve for suitable water-pipeline air/vacuum management duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Air Valve
K10: 1 inch vacuum air valve for suitable water-pipeline air/vacuum management duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Disc Filter
T-TYPE-RANGE: t-type disc filter model range for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Screen Filter
F90HS: 3 inch h-type screen filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Pressure Reducing Valve
AS110PR: 4 inch hydraulic pressure reducing valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Hydraulic Control Valve
AS50SC-T: 1.5 inch t-type solenoid-controlled valve for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter
F63TDZ-L: 2 inch extended self-cleaning disc filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter System
F405H-6: 4 inch five-unit automatic disc filter bank for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter System
F202-3: 2 inch two-unit t-type disc filter bank for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter System
F405H-8: 4 inch five-unit automatic disc filter bank for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter System
F406H-8: 4 inch six-unit automatic disc filter bank for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter System
F304H-6: 3 inch four-unit automatic disc filter bank for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Automatic Disc Filter System
F404H-8: 4 inch four-unit automatic disc filter bank for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Screen Filter
F90SC: 3 inch spiral-clean semi-automatic screen filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Screen Filter
F90ASC: 3 inch automatic backwash screen filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Screen Filter
F110ASC: 4 inch automatic backwash screen filter for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Hydrocyclone Filter
F90LX: 3 inch hydrocyclone sand separator for suitable water-system duties. Manufacturer technical references and application-based selection from SWFI Sabah.

Sand Media Filter System
Two-vessel sand media filtration for suitable industrial and agricultural pretreatment. Confirm source-water solids, flow, pressure and backwash/drain provision.

Sand Media Filter System
Centralised SUS304 or SUS316L vessel options for selected filtration or softening duties. Review the listed models against water analysis, flow and backwash requirements.