Iron Treat iron removal media for water treatment | SWFI

Product overview

Iron Treat is manganese dioxide granules documented for removal of iron, hydrogen sulphide and manganese from water through an oxidation-reduction and filtration process. SWFI can review the application and help match the product to the required duty. Final selection should be verified against the applicable manufacturer datasheet and actual site conditions.

Key features

Manganese dioxide granular media
Documented removal targets: iron, hydrogen sulphide and manganese
Supplied datasheet reports 75% active oxidant
Operating pH range in the supplied sheet: 6.5–8.0

Applications

Groundwater treatment
Iron removal
Hydrogen sulphide reduction
Manganese removal

Technical information

Supplied datasheet reports active oxidant 75%, service flow 6 gpm/cu.ft, freeboard 30–50%, backwash rate 12–15 gpm/sq.ft at 60°F, minimum bed depth 20 in and pH range 6.5–8.0. It reports removal capacity at exhaustion of iron 27 ppm, hydrogen sulphide 17 ppm and manganese 11 ppm. Confirm current specification and design basis before use.

Selection information

Iron, hydrogen sulphide and manganese concentrations
Feed-water pH
Required service flow
Backwash rate and bed depth
Oxidation and filter-vessel configuration

Frequently asked questions

What is Iron Treat used for?

Iron Treat is manganese dioxide granules documented for removal of iron, hydrogen sulphide and manganese from water through an oxidation-reduction and filtration process.

How do I select the right Iron Treat?

Start with the application and required duty, then confirm the relevant size, capacity/range, material, operating conditions and manufacturer specification for this product type. Iron, hydrogen sulphide and manganese concentrations is a key starting point.

What information should I provide when requesting a quotation for Iron Treat?

Provide the product name/model, quantity, application and relevant size, capacity, range or operating requirement. A datasheet, specification, drawing or photograph is useful where available.

Is Iron Treat suitable for water treatment applications?

It can be considered for suitable iron removal media applications where its stated function matches the process requirement. Final suitability depends on the application, operating conditions and the manufacturer's technical data.

Can SWFI source another iron removal media product if this model is not suitable?

Yes. Send SWFI the required function, brand or model, specification, quantity, application, datasheet or photograph where available. We can review the requirement and assist with suitable special-order sourcing, subject to technical suitability, availability and supplier confirmation.

Discuss this product with SWFI in Kota Kinabalu

Can't find the exact Iron Treat model or grade? Send SWFI the brand, model, part number, specification, datasheet or photograph. We can review the requirement and assist with suitable special-order sourcing, subject to technical suitability, availability and supplier confirmation.

Request a quotation View product in the main catalogue →